Troubleshooting

Troubleshooting

After updating Betaflight, my FC shows NO GYRO
You've just updated Betaflight and now you get a NO GYRO warning and your 3D model in the Betaflight Configurator is not moving anymore? You've...
Thu, Jul 9, 2020 at 4:47 PM
After updating Betaflight, some motors won't spin!
You've just updated Betaflight and now one or even more than one motor won't spin!  You've probably flashed the wrong target or didn'...
Thu, Jul 9, 2020 at 4:47 PM
My iFlight BNF default settings got lost!
Did you update Betaflight and forgot to backup our BNF factory tune and custom settings? Please checkout this article on how to get it all back:  https...
Thu, Jul 9, 2020 at 4:49 PM
I can't change VTX Channel/Power in my OSD!
Please checkout this article for further information on how to wire your your VTX to our iFlight FC or Stack! https://iflightrc.freshdesk.com/support/so...
Thu, Jul 9, 2020 at 4:47 PM
My FPV Quad won't arm!
You've either just built or received a fresh iFlight Quad (BNF) but you won't get it to arm? Well that might have different reasons... In ...
Fri, Jul 10, 2020 at 2:29 PM
I can't connect to Betaflight!
You can't connect your FC or BNF to the Betaflight Configurator? Please check the instructions on the first startup screen of your Betaflight Confi...
Tue, Jul 14, 2020 at 8:32 PM
ProTek25 // ESC firmware recommendation!
21-03-14 XING // UPDATE: Official 16.7 factory setup! It's not necessary to reflash your stock firmware! All BNFs have been updated and tuned to ma...
Sun, Mar 14, 2021 at 11:53 PM
My Frsky receiver won't bind / no stick inputs!
XING // 21/3/28 "I just bought the latest and greatest iFlight BNF but after several tries my receiver won't bind to my radio OR is not showin...
Sun, Mar 28, 2021 at 5:26 PM